ABB CRB 15000 - Page 505

NoteAction
Cable tiesSecure the brake release cable with a cable tie.3
xx2000001931
Hex socket head cap screw: M3x30
12.9 Lafre 2C2B/FC6.9 (4 pcs)
Refit the cover with the four screws.4
Tightening torque:
Axis 2: 0.45 Nm
Axis 3: 0.45 Nm
Axis 4: 0.2 Nm
Axis 5: 0.2 Nm
xx2000001935
Concluding procedure
NoteAction
DANGER
Make sure all safety requirements are met when
performing the first test run. See Test run after
installation, maintenance, or repair on page 90.
1
Product manual - CRB 15000 505
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued