NoteAction
Hex socket head cap flange screw:
M4x25 12.9 Lafre
2C2B/FC6.9+PrO-COat111 (16 pcs)
Remove the guide pins and fasten the remaining
two screws.
6
xx2000001967
Tightening torque: 4.6 NmTorque tighten all screws crosswise.7
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (4 pcs).
Refit the cable bracket with the four screws.8
Tightening torque: 0.8 Nm
xx2000001966
Connecting the cabling between the lower arm and swing
NoteAction
xx2000001938
Connect the connectors to each other and snap
them to the cable holders.
1
Continues on next page
Product manual - CRB 15000 519
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the lower arm
Continued
To Next Page
Loading...
