ABB CRB 15000 - Page 539

Opening the housing top cover
NoteAction
xx2000002075
Remove the cover by removing the four screws.1
xx2000002076
Remove the inner plate by removing the screws.2
Removing the tubular
NoteAction
Valid for CRB 15000-5/0.95Cut the cable tie.1
xx2000002077
Valid for CRB 15000-10/1.52 and
CRB 15000-12/1.27
xx2300000839
Continues on next page
Product manual - CRB 15000 539
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the housing
Continued