ABB CRB 15000 - Page 558

Refitting the lower arm covers (-5/0.95)
NoteAction
O-ring: 3HAC061327-044Wipe, lubricate and fit the o-ring to its groove.1
Grease: 3HAC042536-001 (Shell
Gadus S2)
Replace if damaged.
xx2000001955
xx2000001954
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (8 pcs)
Refit the inner covers with four screws each.2
Tightening torque: 1.4 Nm.
xx2000001947
xx2000001930
Continues on next page
558 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the housing
Continued