Refitting the tubular cover (-5/0.95)
NoteAction
O-ring: 3HAC061327-043Wipe, lubricate and fit the o-ring to its groove.1
Grease: 3HAC042536-001 (Shell
Gadus S2)
Replace if damaged.
xx2000002149
Flange socket head screw with
glue: 3HAB3413-312
Refit the cover with new attachment screws.2
M3x12 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue
For tubular cover of CRB 15000-
5/0.95.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
Tightening torque: 1.6 Nm.
xx2000002123
Continues on next page
634 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.4 Replacing the wrist housing
Continued
To Next Page
Loading...
