Securing the base
NoteAction
Attachment screws: M10x35 8.8 (4
pcs).
Lift the base to standing and secure it to the
foundation with the attachment screws and
washers.
1
Washers: 23/10.5/2.5 mm Steel (4
pcs).
Tightening torque: 32 Nm ±10%.
xx2000002006
Refitting the swing(-5/0.95)
NoteAction
Cleaning agent: IsopropanolClean the mounting surface with isopropanol.1
Flange sealant: Loctite 574Apply flange sealant to the corner of the base
mounting surface, as pointed out in the figure.
xx2000001990
Separate the new swing parts by removing the
pre-assembling screws.
2
Continues on next page
Product manual - CRB 15000 687
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued
To Next Page
Loading...
