ABB CRB 15000 - Page 938

Refitting the lower arm covers (-10/1.52 and -12/1.27)
NoteAction
O-ring: 3HAC061327-075Wipe, lubricate and fit the o-ring to its groove.1
O-ring: 3HAC061327-044Replace if damaged.
Grease: 3HAC042536-001 (Shell
Gadus S2)
xx2300000832
xx2300000831
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (8 pcs) x 2
Refit the inner covers with eight screws each.2
Tightening torque: 1.4 Nm.
xx2300000813
xx2300000830
Continues on next page
938 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.6.5 Replacing the axis-3 joint unit
Continued