ABB FENA-01 - Page 14

Drive configuration
14
Table 1. FENA-01 Configuration Parameters - Group A (Group 1)*
Par.
no.
Parameter name Alternative settings Default
setting
1 FBA TYPE (Read-only) ETHERNET
2 PROTOCOL/
PROFILE
Modbus/TCP:
0 ABB Drives Classic
1 ABB Drives Enhanced
2 Transparent 16-bit
3 Transparent 32-bit
EtherNet/IP:
100 ODVA AC/DC Drive
101 ABB Drives Profile
102 Transparent 16-bit
103 Transparent 32-bit
0 Modbus/TCP
3COMMRATE 0 Auto-negotiate;
1 100 Mbps, Full Duplex
2 100 Mbps, Half Duplex
3 10 Mbps, Full Duplex
4 10 Mbps, Half Duplex
0 Auto-negotiate
4 IP CONFIGURATION 0 Static IP
1 Dynamic IP (DHCP)
1 Dynamic IP
(DHCP)
5 IP ADDRESS 1 0…255 0
6 IP ADDRESS 2 0…255 0
7 IP ADDRESS 3 0…255 0
8 IP ADDRESS 4 0…255 0
9 SUBNET CIDR 1…31 1
10 GW ADDRESS 1 0…255 0
11 GW ADDRESS 2 0…255 0
12 GW ADDRESS 3 0…255 0
13 GW ADDRESS 4 0…255 0