ABB FENA-01 - Protocols

Drive configuration
22
Table 3. FENA-01 Configuration Parameters - Group C (Group 3)*
*Actual parameter group number depends on the drive type. Eg,
group C (group 3) equals to parameter group 54 in ACS350 and
ACS355, and group 52 in ACSM1, ACS850 and ACQ810.
** Number of parameters in this group may vary by drive.
Par.
no.
**
Parameter name Alternative settings Default
setting
1DATA IN 1
(drive to client)
0 to 9999
Format: xxyy, where
xx = parameter group and
yy = parameter index.
0
2 DATA IN 2 See DATA IN 1 above. 0
3 DATA IN 3 See DATA IN 1 above. 0
4 DATA IN 4 See DATA IN 1 above. 0
5 DATA IN 5 See DATA IN 1 above. 0
6 DATA IN 6 See DATA IN 1 above. 0
7 DATA IN 7 See DATA IN 1 above. 0
8 DATA IN 8 See DATA IN 1 above. 0
9 DATA IN 9 See DATA IN 1 above. 0
10 DATA IN 10 See DATA IN 1 above. 0
11 DATA IN 11 See DATA IN 1 above. 0
12 DATA IN 12 See DATA IN 2 above. 0