2PAA118721 | Quick Installation Guide LD 810HSE Ex 13
Mounting and Dismounting
Installation and inspection tasks are to be carried out by qualied
personnel only, i. e. personnel qualied according to TRBS 1203 or
similar! The denition of terms can be found in IEC 60079-17.
Make sure the LD 810HSE Ex is mounted in a manner that the
power supply disconnecting device or interrupt facility can always
be reached easily.
Depending on the installation position, the maximum ambient
operating temperature may differ. Refer to "Section 4 Specica-
tions" on page 30 for detailed information.
To Next Page
Loading...
