2PAA118721 | Quick Installation Guide LD 810HSE Ex 33
Section 5 Manufacturer‘s Declaration
This device complies with the requirements of the EC directive 2014/30/EU,
“Electromagnetic Compatibility” (EMC directive). It meets the following harmo-
nized standards:
– EN 55011 - Industrial, scientific and medical (ISM) devices - radio
disturbance - limits and methods of measurement
– EN 55032 - Electromagnetic compatibility of multimedia equipment (MME)
and interference emission
– EN 61000-6-4 - Electromagnetic compatibility (EMC); part 6-4: generic
standard – Emission standard for industrial environments
– EN 61000-6-2 - Electromagnetic compatibility (EMC); part 6-2: generic
standard - Immunity for industrial environments
To fulll the EMC requirements, the other components of your
installation (DC adapter, Industrial Ethernet devices, etc.) also have
to meet the EMC requirements. A shielded cable must be used. In
addition, the cable shield must be grounded properly.
RoHS
The LD 810HSE Ex device is RoHS compliant.
WEEE
Electrical and electronic equipment must be disposed of separately
from normal waste at the end of its operational lifetime. Packaging
material and worn components shall be disposed of according to
the regulations applicable in the country of installation.
To Next Page
Loading...
