EasyManua.ls Logo

ABB Foundation LD 810HSE Ex - Section 2 Installation; Installation in Hazardous Locations

ABB Foundation LD 810HSE Ex
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2PAA118721 | Quick Installation Guide LD 810HSE Ex 7
Section 2 Installation
Installation in Hazardous Locations
The LD 810HSE Ex is suitable for use and installation in areas with potentially
explosive atmosphere in accordance to the Division model (North America) and
the Zone model (Europe and IEC countries) of hazardous locations.
Danger of explosion!
If energized conductors are plugged to or unplugged from the
LD 810HSE Ex in potentially explosive atmosphere, this may result
in an explosion. Thus, do not connect or disconnect energized
conductors!
Danger of explosion!
Do not use the LD 810HSE in hazardous areas, only the
LD 810HSE Ex is suitable to be used in areas with potentially
explosive atmospheres. Check the device label for device type and
marking for explosion protection.
This manual does not supersede the applicable national regula-
tions, standards or directives. Thus, follow these regulations,
standards or directives.

Related product manuals