Commissioning
D184B140U02 FSM4000 55
6.4.2 System integration
Use of PROFIBUS PA profile B, B3.0 ensures interoperability and interchangeability of units.
Interoperability means that devices from different manufacturers can be physically connected to
a bus and are communication-ready. In addition, third-party devices can be interchanged
without having to reconfigure the process control system.
To support interchangeability, ABB provides three different GSD files (equipment master data)
that can be integrated in the system.
Users decide at system integration whether to install the full range of functions or only part.
Important
Units are interchanged using the parameter ID number selector, which can only be modified
on an ac
clical basis.
The following table describes the available GSD files:
Number and type of
function blocks
ID number GSD file name
1 x AI 0x9700 PA139700.gsd
1 x AI; 1 x TOT 0x9740 PA139740.gsd
1 x AI; 2 x TOT;
and all manufacturer-specific
parameters
0x078C ABB_078C.gsd
The manufacturer-specific GSD file ABB_078C is available to download from the ABB
homepage http://www.abb.com/flow.
The standard GSD files PA1397xx.gsd are available for download from the Profibus
International homepage: http://www.profibus.com
To Next Page
Loading...
