15Step 3 | Software set up
—
FlexPendant Apps
—
SafeMove
A correct safety
configuration is mandatory
and essential for a safe
experience and to enable full
functionality of the cobot
To edit the safety settings,
you need to log in to the
Flexpendant as admin user
with the following
credentials
Account: Admi
Password: robotic
You can load the safety
template, to get started
quickly. To do this click on
Edit, and then there will be a
dialog box as shown in the
picture, and select, Yes, Use
Template Configuration.
Check if the template has
suitable safety cofigurations
and then click write to
controller to finalise
A safety configuration is
required in order to run the
cobot in automatic mode.
For more information on
safety configuration, refer to
the online tutorial or product
manual. Refer to the links on
page 01
To Next Page
Loading...
