16 Step 3 | Software set up
—
Sychronization
You may need to
synchronize the safety
controller when editing the
safety settings
Access the sychronization
function via Settings >
Safety controller
The robot must be in
manual mode to do this.
You must jog the robot to
the sync positions to
synchronize the robot. Make
sure the logged-in user has
safety user grants.
—
Wizard Easy Programming
You can program your
application using Wizard.
The intuitive user interface
enables you to program the
cobot without prior
knowledge or experience.
https://to.abb/k2AoUvpa
Wizard
Find more information
in online tutorials.
To Next Page
Loading...
