Operation Manual / TPS44-F.. - TPS61-F..
Operation 4
Speed measurement 4.4 Page 53
© Copyright 2016 ABB. All rights reserved.
August 2017HZTL2412_ENRevision F
NOTICE
Sealing the speed sensor
The speed sensor is designed with a sealing lip and does not require an
additional gasket when fitted.
τ Connect cable connector to speed sensor.
τ Switch on lubricating oil supply to turbocharger.
Failure of speed measuring system
Possible reasons for failure of the speed measuring system are described
in the chapter Troubleshooting.
4.4.3
To Next Page
Loading...
Need help?
General
