ABB INSITE PRO M COMPACT SCU100 - SSL Certificate

Ethernet/IP
It is possible to enable Ethernet/IP protocol, download EDS files for PLC interfacing and files for
Ethernet/IP Explorer software. A specific assembly can be defined adding multiple rows.
11.4.SSL certificate
In this section it is possible to upload or generate a .pem file containing a private key and a public
certificate in order to provide a secure connection via the web browser.
Upload
It is possible to browse, upload or download the currently in place certificate.
For this purpose, please drag and drop the .pem file to the browser or click to browse, then push the
upload button and wait for the uploading to finish. After a successful uploading process, the web server
reboots.
It is also possible to download a currently used certificate by clicking download certificate.
Generate
In order to generate a SSL certificate, following configurations must be considered:
IP address
Indicates your currently configured IP address on the
device
Subnet mask
Indicates your currently configured subnet mask on the
device
Gateway Indicates your currently configured gateway on the device
Select whole subnet
If checked, you can generate a certificate for the whole
subnet.
The minimal subnet mask is 255.255.252.0.
Domain / IP
You can manually type in IP addresses and insert them to
the table with the Add button
SCU100 INSITE PRO M COMPACT USER MANUAL 51