13.WebUI – Analytics
13.1.Historical values
Here it is possible to visualize the “Historical values” of different measurements according to the
category or group selected.
Data resolution depends on the device and it binds the maximum time interval that can be shown.
For I/O Modules it is possible to show pulses or “Counter” and “Status” of input/output channels.
Data resolution
Control unit 10 seconds, Quarter, Hour, Day and Week
Current sensors 10 seconds, Quarter, Hour, Day and Week
Meters 30 seconds or 15 min (according to type of measurement)
I/O Modules Last 1000 events
All the devices have to be first assigned and configured (please refer to Configuration Devices).
In case of DC current sensors measurement, please refer to “Configuration Current sensors” and
configure “Phase” as DC. Accordingly, when “DC” is displayed under “Phase”, DC current and active power
values are displayed on this page.
After selecting the parameter, the resolution and the reference time frame, the “Export” button allows the
user to carry out direct data export as .CSV file.
SCU100 INSITE PRO M COMPACT USER MANUAL 59
To Next Page
Loading...
