ABB INSITE PRO M COMPACT SCU100 - Meter Integration via Modbus

15.2.Meters
Insite pro M allows to connect up to 16 meters with RS-485 interface. Supported are ABB M2M, M4M and
EQ meters with Modbus RTU communication protocol. Each meter can be assigned to Modbus ID from 1
to 16.
Data from meters are available on the control unit WebUI and using Modbus TCP or Modbus RTU protocol.
When accessing through Modbus protocol, registers of each connected meter are mapped to control unit
static register map. The map is attached in the Excel file in the tab cu insite:
External
Modbus
address
Slave
Modbus
ID
External Modbus
data type
Category Quantity Registers
37062 1 Unsigned integer Energies
Ph/Tariff
Active import L1..L3,
tar 1..8
96
37158 1 Unsigned integer Energies
Ph/Tariff
Active export L1..L3,
tar 1..8
96
37254 1 Unsigned integer Energies
Ph/Tariff
Reactive import L1..L3,
tar 1..8
96
37350 1 Unsigned integer Energies
Ph/Tariff
Reactive export L1..L3,
tar 1..8
96
37446 1 Unsigned integer Energies
Ph/Tariff
Apparent import L1..
L3, tar 1..8
96
37542 1 Unsigned integer Energies
Ph/Tariff
Apparent export L1..
L3, tar 1..8
96
37638 1 Unsigned integer Energies
phases
Active import L1 4
37642 1 Unsigned integer Energies
phases
Active import L2 4
37650 1 Unsigned integer Energies
phases
Active export L1 4
Control unit register map provides information about address for each quantity, number of registers
on which it is presented and data type. The details for each register depend from meter type which is
connected to specific slave Modbus ID and are available in the Excel file in the tab meters.
E.g. EQ meter is connected to Modbus ID 1. The Active import L1 variable is available on the control unit
register address 37638. It can be read from the meters tab in Excel file that the unit for this register is
kWh, register is not writable, quantity is refreshed every 30 seconds for Modbus and WebUI and stored
every 900 seconds on the internal flash memory. The multiplier for this register is 0.01. To retrieve this
quantity the EQ meter Modbus register 5460 is queried.
Category Quantity External
Modbus data
type
External
Modbus
registers
Unit Writable EQ meter
registers
M4M
address
Energies
phases
Active
import L1
Unsigned
integer
0 kWh 4 5460
Energies
phases
Active
import L2
Unsigned
integer
0 kWh 4 5464
Energies
phases
Active
import L3
Unsigned
integer
0 kWh 4 5468
M4M
multiplier
M2M
address
M2M
multiplier
EQ
meter
Modbus
EQ meter
webserver
EQ
meter
storage
EQ
meter
address
EQ meter
multiplier
0,01 1074 0,1 30 30 900 5460 0,01
0,01 1076 0,1 30 30 900 5464 0,01
0,01 1078 0,1 30 30 900 5468 0,01
If the register address for quantity is 0, then it means that meter is not queried for this value and it is
calculated by control unit, using other available data.
SCU100 INSITE PRO M COMPACT USER MANUAL 69