Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 1200 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Battery includes protection cir-
cuits. Only replace with a spe-
cified spare part or an ABB-ap-
proved equivalent.
3HAC051036-001Battery pack
Used for IRB 1200 Type B. See
Type B of IRB 1200 on page 873.
For robots with protection type
Hygienic
Battery includes protection cir-
cuits. Only replace with a spe-
cified spare part or an ABB-ap-
proved equivalent.
3HAC044075-001Battery pack, SafeMove 2-sup-
ported
Battery pack, Hygienic
Not used with protection class
IP40.
Replace if damaged.
3HAC056728-001 /
3HAC080706-001
Gasket on EIB/SMB cover
Required tools and equipment
NoteArticle numberEquipment, etc.
Used to release the motor brakes.-24 VDC power supply
Content is defined in section Standard
toolkit on page 890.
-Standard toolkit
CAUTION
Always cut the paint with a knife and grind the paint edge when disassembling
parts. See Cut the paint or surface on the robot before replacing parts on page 158.
Required consumables
NoteArticle numberConsumable
-Cable straps
Removing the battery pack
Use this procedure to remove the battery pack.
Preparations before removing the battery pack
NoteAction
Decide which calibration routine to use, and take
actions accordingly prior to beginning the repair
procedure.
1
Continues on next page
Product manual - IRB 1200 135
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
3 Maintenance
3.4.1 Replacing the battery pack
Continued
To Next Page
Loading...
