Refitting the mechanical stop
Use these procedures to refit the mechanical stop.
Refitting the axis-3 mechanical stop
NoteAction
Mechanical stop for axis 3: 3HAC047603-
001
Refit the mechanical stop with the screws
and washers.
1
Screws: 3HAB3409-241 (2 pcs).
Tightening torque: 0.2 Nm.
xx1500000753
Refitting the axis-3 cable collar
NoteAction
Screws: 3HAC050368-005 (3 pcs).Refit the cable collar.
Tip
In order to access the screws it is helpful to re-
lease the brakes and manually move the robot
arm. Temporarily turn on the power to the robot
and release the brakes.
1
Tightening torque: 0.14 Nm.
xx1500000489
Continues on next page
Product manual - IRB 14000 299
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.6.4 Replacing the axis-3 mechanical stop
Continued
To Next Page
Loading...
