ABB IRB 14000 - Page 313

NoteAction
Screws: M3x6 8.8-A2F (4 pcs).Refit the bottom cover and tighten the screws.
CAUTION
Be careful not to damage the cables.
2
Tightening torque: 0.2 Nm
xx1500000310
Concluding procedure
NoteAction
CAUTION
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section DANGER
- First test run may cause injury or damage!
on page 53.
1
Product manual - IRB 14000 313
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.2 Replacing the controller fan
Continued