ABB IRB 14000 - Page 399

NoteAction
B
A
xx1500000728
Attachment screwA
DeviceNet master boardB
Fit the DeviceNet master board by pushing it into
the socket on the motherboard.
CAUTION
Always grip the board around the edges to avoid
damage to the board or its components.
3
Refit the attachment screw on the DeviceNet
master bracket.
4
Closing the computer
NoteAction
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
1
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
2
Connect the fan connector.
CAUTION
Be careful not to stretch or squeeze the fan cable.
3
B
A
xx1300000684
Attachment screw (4 pcs)A
CoverB
Fasten the computer cover with its attachment
screws.
4
Continues on next page
Product manual - IRB 14000 399
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.15 Replacing the DeviceNet master
Continued