Refitting the base
Use this procedure to refit the complete arm system to the base.
NoteAction
CAUTION
The weight of the base is 49 kg
All lifting accessories used must be sized
accordingly.
1
Valid for IRB 2600-20/1.65, IRB 2600-
12/1.65, IRB 2600-12/1.85, IRB 2600ID-
15/1.85, IRB 2600ID-8/2.0:
Fit three lifting eyes to the base and secure
with roundslings in an overhead crane or
similar.
2
Lifting eye: M8
Valid for IRB 2600-20/1.65 type C, IRB
2600-12/1.65 type C:
Lifting eye: M12
xx1800000885
Fit the new base to the support legs and
secure with the attachment screws.
3
Tip
Use Loctite 7063 (or similar) for cleaning.
Valid for IRB 2600-20/1.65, IRB 2600-
12/1.65, IRB 2600-12/1.85, IRB 2600ID-
15/1.85, IRB 2600ID-8/2.0:
Remove residues of old Loctite and other
contaminations from surfaces before apply-
ing new Loctite 574.
4
Continues on next page
302 Product manual - IRB 2600
3HAC035504-001 Revision: AD
© Copyright 2009-2023 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the base
Continued
To Next Page
Loading...
