NoteAction
See the figure in:
• Location of axis-1 and axis-2
motors on page 307
Only applicable to motor axis 1!
Cover the hole if replacement of motor axis 1
is not immediate, in order to avoid contamina-
tion.
17
See the figure in:
• Location of axis-1 and axis-2
motors on page 307
Only applicable to motors axes 4, 5 and 6!
Check that the o-ring also is removed. It might
stay in the armhouse when the motor is re-
moved.
18
Product manual - IRB 2600 319
3HAC035504-001 Revision: AD
© Copyright 2009-2023 ABB. All rights reserved.
4 Repair
4.7.1 Removing motors
Continued
To Next Page
Loading...
