4.6 Frame and base
4.6.1 Replacing stop pin axis 1
Location of stop pin axis 1
The stop pin axis 1 is located as shown in the figure.
xx0800000045
Attachment screws M6x16 quality 8.8-A2F (2 pcs)A
BracketB
O-ring (2 pcs)C
BracketD
Stop pinE
Required equipment
NoteEquipment
For spare part no. see chapter Spare parts,
section:
• Lower arm and frame on page 350
Stop pin
Content is defined in section Standard tools on
page 341.
Standard toolkit
Continues on next page
3HAC033453-001 Revision: H 275
© Copyright 2009-2013 ABB. All rights reserved.
4 Repair
4.6.1 Replacing stop pin axis 1
To Next Page
Loading...
