ABB IRB 4600 Foundry Prime - Replacement of Air Nipples and Hoses (Foundry Prime)

4.3.3 Replacement of air nipples and hoses (Foundry Prime)
Function
The pressure inside the areas A and B are 0.2 - 0.3 bar.
xx1100000047
Required equipment
NoteEquipment
Content is defined in section Standard tools
on page 393.
Standard toolkit
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
12691907-1Loctite 577
3HAC026621-001Rust preventive
Continues on next page
Product manual - IRB 4600 Foundry Prime 233
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.3.3 Replacement of air nipples and hoses (Foundry Prime)