NoteEquipment
-Brush
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
3HAC026759-001Sikaflex 521FC
12340011-116Loctite 574
Brush
3HAC035355-001Foundry Prime touch up kit
Note
Make sure that the special Foundry Prime painting of the robot is not broke during
testing, installation or repair work. Use touch up kit available for Foundry Prime
art. no. 3HAC035355-001 to repair the damage paint coat see section Cut the
paint or surface on the robot before replacing parts on page 201.
CAUTION
Always cut the paint with a knife and grind the paint edge when disassembling
parts. See Cut the paint or surface on the robot before replacing parts on page 201.
Continues on next page
234 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.3.3 Replacement of air nipples and hoses (Foundry Prime)
Continued
To Next Page
Loading...
