ABB IRB 6620 - 3 Maintenance; 3.1 Introduction

2 DressPack and SpotPack
2.9.1 Options
3HAC 025861-001 Rev.E 113
Souriau
CP/CS/CBus, Proc 1 axis 6 on tool side for option 780-3.
This kit offers a kit with connectors to be mounted at toolside of axis 6
.
This must be assembled by the customer.
The kit contains:
• 1 Hose fitting (Parker Push lock (1/2”, M22x1,5 Brass, 24 degree seal))
• Connector with:
Figure 74 Connector for CP/CS/CBUS, Proc1 axis 6.
1 pcs UTOW Pin connector 32p (Souriau) Shell size 18
1 pcs Backshell (Souriau) Shell size 14
1 pcs Cable cland, EMC (Souriau) M20 D=11,0-14,0
1 pcs UTOW Pin connector 19p (Souriau) Shell size 14
1 pcs Backshell (Souriau) Shell size 18
1 pcs Cable gland, EMC M25 D=13,0-16,0
40 pcs Pin 0.21-0.93 mm
2
Assembly Accessories to complete connector
Assembly instruction