3 Maintenance
3.3.3. Inspection, oil level gearbox axis 3
1193HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
3.3.3. Inspection, oil level gearbox axis 3
Location of gearbox
The axis 3 gearbox is located in the upper arm rotational center as shown in the figure below.
xx0200000230
Required equipment
A Gearbox axis 3
B Oil plug, filling
C Oil plug, draining
Equipment, etc. Art. no. Note
Lubricating oil 3HAC023140-001 Kyodo Yushi TMO 150
Note! Do not mix with other oil
types!
Standard toolkit - The content is defined in section
Standard toolkit on page 394.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
These procedures include
references to the tools required.
Continues on next page
To Next Page
Loading...
