3 Maintenance
3.4.2. Oil change, gearbox axis 1
3HAC026876-001 Revision: C156
© Copyright 2006-2008 ABB. All rights reserved.
2.
WARNING!
Handling gearbox oil involves several safety risks.
Before proceeding, please observe the safety
information in section WARNING - Safety risks during
work with gearbox oil on page 36.
3. Open the oil plug, filling. Shown in the figure Location of
oil plugs on page 154.
4. Refill the gearbox with lubricating oil.
The amount of oil to be refilled depends on the
amount previously being drained. The correct oil level
is detailed in section Inspection, oil level gearbox axis
1 on page 115.
Art. no. and the total amount are
specified in Required equipment
on page 154.
5.
NOTE!
Don´t mix Kyodo Yushi TMO 150 with other oil types!
Detailed in section Oil in
gearboxes.
6. Refit the oil plug, filling. Tightening torque: 24 Nm.
Action Note
Continued
To Next Page
Loading...
