4 Repair
4.3.4. Replacement of cable harness, axes 1-4- IRB 6640ID
2253HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
8. Secure the cable gland with four attachment
screws from inside the SMB recess.
xx0700000109
• A: Cable gland
• B: Attachment screws,
inside SMB recess
9. Reconnect connectors R2.SMB, R1.SMB1-3,
R1.SMB4-6 to the SMB unit.
Reconnect X8, X9 and X10 to the brake release
unit.
Reconnect R1.G if it has been disconnected.
xx0700000104
10. Secure the SMB cover with its attachment screws.
Action Note
Continued
Continues on next page
To Next Page
Loading...
