4 Repair
4.6.2. Replacement of motor axis 2
3HAC026876-001 Revision: C312
© Copyright 2006-2008 ABB. All rights reserved.
10. Fill the four screw recesses on the new motor with
Sikaflex. (After hardening, Sikaflex can be formed
with a knife)
xx0600002875
•A: Motor unit
• B: Sikaflex in screw
recesses
11. Continue to refit the new motor according to
section, Refitting, motor on page 308.
12. Perform a leak test according to Inspection of air
hoses (Foundry Prime) on page 138.
Action Note
Continued
To Next Page
Loading...
