4 Repair
4.6.4. Replacement of motor, axis 4
3253HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
5. Fill the four screw recesses on the new motor with
Sikaflex. (After hardening, Sikaflex can be formed
with a knife)
xx0600002875
•A: Motor unit
• B: Sikaflex in screw
recesses
6. Continue to refit the new motor according to
section, Refitting, motor axis 4 on page 322.
7. Perform a leak test according to Inspection of air
hoses (Foundry Prime) on page 138.
Action Note
Continued
To Next Page
Loading...
