4 Repair
4.7.1. Replacement gearbox axis 1
3533HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
4. Apply Mercasol 3106 on all machined surfaces
and on the radial seals underneath the cable
guide.
xx0700000465
• A: Machined surfaces
5.
DANGER!
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in section DANGER - First test
run may cause injury or damage! on page 33.
Action Note
Continued
To Next Page
Loading...
