ShaftA
WasherB
Hex socket head cap screw M16x70C
VK-coverD
WasherE
Radial sealing with dust lip 50x68x8F
Spherical roller bearingG
Radial sealing with dust lip 50x68x8H
O-ringJ
End coverK
Radial sealing (not used in clean room applications)L
Cradle bearing kitM
Retaining ring, boreN
WasherO
Hex socket head cap screw M16x70P
VK-coverQ
Required equipment
NoteArt. no.Spare part no.Equipment
Includes the parts shown
in the figure above.
See Spare partsMaintenance parts,
shaft
For lubrication of the com-
ponents.
3HAB3537-1Grease
The tools in the set are
shown in the section Dis-
mounting and mounting
tool 3HAC028920-001 on
page 469
3HAC028920-001Toolkit
These procedures include
references to the tools re-
quired.
Other tools and proced-
ures may be required.
See references to
these procedures in
the step-by-step in-
structions below.
Tool set up 3HAC028920-001
The set up of the press tool used for the process of removal and refitting of spherical
bearing is described in section Dismounting and mounting tool 3HAC028920-001
on page 469.
Continues on next page
Product manual - IRB 6640 Foundry Prime 299
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.5.3 Replacement of spherical roller bearing, balancing device
Continued
To Next Page
Loading...
