ABB IRB 6640 Foundry Prime - Page 426

Preparations of spare part before the refitting
Use this procedure to make the necessary preparations of the spare part before
the refitting.
NoteAction
xx1000000437
Check that the spare part is painted
as shown in the figure.
1
Parts:
• A: Unpainted surfaces
• B: Painted surfaces
Dimension: 276x3.53
xx0200000173
Make sure that the o-ring is fitted on
the new gearbox unit.
Tip
Apply some grease on the o-ring in
order to make it stay in the groove
during assembly.
2
Part:
• A: O-ring, gearbox axis 3
Continues on next page
426 Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.3 Replacing gearbox axis 3
Continued