2 Installation and commissioning
2.5.11. Installation of cooling fan for motors, axes 1-3 (option)
3HAC023082-001 Revision: E98
© Copyright 2004-2008 ABB. All rights reserved.
Cooling fan
The details of the cooling fan are shown in the figure below.
xx0500002158
Required equipment
A Fanbox
B Attachment screws, fanbox plates (9 pcs)
C Groove in the connector
D Tightening screws, fanbox (3 pcs)
Equipment Art. no. Note
Cooling fan 3HAC15374-1
Cabling, position switches
and cooling fans, axes 1, 2
and 3
3HAC15390-1
(IRB 6600/6600ID)
3HAC16659-1
(IRB 6650/6650ID)
Choose this cabling if equipping the robot
with both position switches and cooling
fans or with cooling fans on axis 3.
Cabling, cooling fans, axes
1 or 2
3HAC023599-001 Choose this cabling if only equipping the
robot with cooling fans on axis 1 or 2 (not
on axis 3 and not with position switches).
Continued
Continues on next page
To Next Page
Loading...
