3 Maintenance
3.3.14. Inspection, signal lamp
3HAC023082-001 Revision: E174
© Copyright 2004-2008 ABB. All rights reserved.
xx0600003071
Required equipment
A UL signal lamp
B Clamp
C Cable strap, outdoor
D Motor, axis 3
E Attachment screw, M6x8 quality 8-A2F(2 pcs)
Equipment, etc. Art. no. Note
Signal lamp 3HAC10830-1 To be replaced in case of detected
damage.
Standard toolkit - The contents are defined in section
Standard toolkit on page 436.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
These procedures include
references to the tools required.
Continued
Continues on next page
To Next Page
Loading...
