3 Maintenance
3.4.5. Oil change, gearbox, axis 4
1933HAC023082-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
2.
WARNING!
Handling gearbox oil involves several safety risks.
Before proceeding, please observe the safety
information in section WARNING - Safety risks
during work with gearbox oil on page 41.
3. Refill the gearbox with lubricating oil through the oil
plug, filling.
The amount of oil to be refilled depends on the
amount previously being drained. The correct oil
level is detailed in section Inspection, oil level
gearbox axis 4 on page 143.
Shown in the figure Location of
gearbox on page 191!
Art. no. and total amount are
specified in Required equipment
on page 191.
4.
WARNING!
Do not mix the oil types! If wrong oil is refilled, the
gearbox must be rinsed as detailed in section
WARNING - Mixed oils may cause severe damage
to gearbox! on page 42!
5. Refit the oil plug, filling. Tightening torque: 24 Nm.
Action Note
Continued
To Next Page
Loading...
