3 Maintenance
3.5.2. Rust preventive, bearing axis 1 (Foundry Prime)
3HAC023082-001 Revision: E206
© Copyright 2004-2008 ABB. All rights reserved.
Procedure
The following procedure details how to grese the bearing axis 1.
Action Note/Illustration
1.
DANGER!
Turn off all electric power, hydraulic and
pneumatic pressure supplies to the robot!
For Foundry Prime robots: Do not turn off the air
pressure to motors and SMB.
2. Remove the plastic ring.
xx0600002866
• A: plastic ring
3. Wipe the surface under the ring
4. Apply the rust preventive on the bearing with the
brush.
xx0600002867
• A: bearing
5. Refit the plastic ring.
Continued
To Next Page
Loading...
