2 Installation and commissioning
2.5.8. Fitting equipment on robot
853HAC023082-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
Illustration, fitting on turning disk
The illustration below shows the mounting holes available for fitting equipment on the
turning disk.
xx0200000197
- Turning disk for robot version IRB 6600 - 225/2.55 and - 175/2.8, IRB 6650 - 125/3.2
and - 200/2.75
Continued
Continues on next page
To Next Page
Loading...
