Description
30 Product Specification IRB 6600 M2000
1.5 Maintenance and Troubleshooting
The robot requires only a minimum of maintenance during operation. It has been
designed to make it as easy to service as possible:
- Maintenance-free AC motors are used.
- Oil is used for the gear boxes.
- The cabling is routed for longevity, and in the unlikely event of a failure, its
modular design makes it easy to change.
The following maintenance is required:
- Changing filter for the transformer/drive unit cooling every year.
- Changing batteries every third year.
The maintenance intervals depend on the use of the robot. For detailed information on
maintenance procedures, see Maintenance section in the Product Manual.
To Next Page
Loading...
