The information in this document is subject to change without notice and should not be construed as a
commitment by ABB Automation Technology Products AB, Robotics. ABB Automation Technology
Products AB, Robotics assumes no responsibility for any errors that may appear in this document.
In no event shall ABB Automation Technology Products AB, Robotics be liable for incidental or
consequential damages arising from use of this document or of the software and hardware described
in this document.
This document and parts thereof must not be reproduced or copied without ABB Automation
Technology Products AB, Robotics’s written permission, and contents thereof must not be imparted to
a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
Additional copies of this document may be obtained from ABB Automation Technology Products AB,
Robotics at its then current charge.
© Copyright 2001 ABB. All rights reserved.
Article number: 3HAC 14064-1
Issue: M2000/Rev. 2
ABB Automation Technology Products AB
Robotics
SE-721 68 Västerås
Sweden
To Next Page
Loading...
