Description
58 Product Specification IRB 6600 M2000
Option 2181 Electrical proportional valve for air
The option includes a proportional valve with integrated control circuit and connection
cable to the splitbox. The proportional valve controls the pinching force of the
pneumatic spot welding gun and is designed to obtain optimal performance during long
operation time. The proportional valve is controlled by the weldtimer in the Power unit.
The included distribution block can be used for two additional non-regulated
compressed air circuits.
An analogue signal 0-10V, controls the proportional valve and the air pressure is in the
range of 0-12 bar.
Option 2183 Cable to split box, 7m
This option includes floor cable of 7 m length for signals to the split box sitting on the
water and air unit. This cable is connect to the Power unit (option 2087/2088) with a
modular harting (Han Compact with insert type HD). The cable ends also with a quick
connector at the split box end.
Option 2184 Cable to split box, 15m
This option includes floor cable of 15 m length for the split box. See description for
option 2183.
Option 2185 Cable to split box, 30m
This option includes floor cable of 30 m length for the split box. See description for
option 2183.
To Next Page
Loading...
