3 Maintenance
3.3.7. Inspection, balancing device
1313HAC020993-001 Revision: G
© Copyright 2004-2008 ABB. All rights reserved.
Required equipment
Equipment, etc. Spare part no. Art. no. Note
Maintenance kit,
complete
- Includes:
• complete kit including the
kit with bearings and
seals
• instructions for mainte-
nance.
Maintenance kit,
bearings and seals
- Includes:
• kit with bearings, o-rings
and seals only
• instructions for mainte-
nance.
Securing screw Securing screw in the shaft.
M16 x 180
Locking liquid must be used
when fitting the screw (Loctite
245)!
Toolkit for
maintenance
Puller for separator 4552-2
(Bahco)
Used for removing the spherical
roller bearings.
Separator 4551-C
(Bahco)
Used for removing the spherical
roller bearings.
Standard toolkit - The contents are defined in
section Standard toolkit on page
388 .
Other tools and
procedures may be
required. See
references to these
procedures in the
step-by-step
instructions below.
These procedures include
references to the tools required.
Continued
Continues on next page
To Next Page
Loading...
