ABB IRB 6660 - 130/3.1

To Next Page

To Previous Page

Cooling fan

The details of the cooling fan are shown in the figure below.

xx0500002158

FanboxA

Attachment screws, fanbox plates (9 pcs)B

Groove in the connectorC

Tightening screws, fanbox (3 pcs)D

Required equipment

NoteArticle numberEquipment

3HAC15374-1Cooling fan

Choose this cabling if equipping the robot

with cooling fans on both axis 1 and 2.

3HAC046362-001Cabling, cooling fan, axes 1

and 2

An additional connection plate must be

fitted to the robot base, if not already in-

stalled. The plate is shown in the figure

Plate for customer connections, at base

on page 92.

3HAC025778-001Plate for customer connec-

tions

Specified in section Fan cables (option)

on page 106.

-Additional cabling to the

controller

The set includes:

• fan axes 1 & 2 cable harness

• plate, customer

• attachment screws and nuts.

3HAC023999-001Material set fan axes 1 and

3HAC025488-001Cable harness inside control-

ler

Continues on next page

Product manual - IRB 6660 91

3HAC028197-001 Revision: S

2 Installation and commissioning

2.3.10 Installation of cooling fan for motors (option)

Continued

ABB IRB 6660 - 130/3.1 - Page 91