ABB IRB 6660 - Spare Parts - Options

11 Spare parts - options
Parts list
All components required for installation of optional equipment, such as cabling,
extra attachment plates etc. are listed in the installation procedure for the
equipment. The table below points out where the installation procedure for the
equipment is detailed.
Installation is detailed in:EquipmentOption num-
ber
Lifting robot with fork lift in Product manual - IRB
6660
Fork lift set, including all
required equipment
159-1
Installation of cooling fan for motors, axes 1 and
2 in Product manual - IRB 6660
Cooling fan, axis 187-1
-Cabling, cooling fan axis 1-
Mechanically restricting the working range of
axis 1 in Product manual - IRB 6660
Mechanical stop for axis 1,
7.5°
29-2
Mechanically restricting the working range of
axis 1 in Product manual - IRB 6660
Mechanical stop for axis 1,
15°
29-1
-Signal lamp213-1
Securing the base plate in Product manual - IRB
6660
Base plate37-1
Product manual, spare parts - IRB 6660 35
3HAC049112-001 Revision: F
© Copyright 2014 - 2019 ABB. All rights reserved.
11 Spare parts - options