NoteAction
xx1300000730
Unscrew the screws and washers that
holds the bracket with the SMB unit, and
remove the SMB unit.
Put the SMB unit in an ESD bag until it shall
be refitted.
4
xx1300000655
Unscrew the attachment screws that hold
the SMB/BU cover from inside the SMB
recess.
5
xx1300000560
Use caution and pull out the cable harness
from the SMB recess.
Note
The parts are sealed with Sikaflex. Remove
the part carefully.
6
Continues on next page
Product manual - IRB 6700 253
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.4.1 Removing the cable harness
Continued
To Next Page
Loading...
