NoteAction
xx1300000561
Refit the base cover.10
Refitting the cable harness in the frame
NoteAction
O-ring, 21522012-429
xx1300000737
Check the o-ring located on the SMB/BU
cover. Replace if damaged.
1
The figure shows the position of the o-ring.
Wipe clean the contact surfaces of the
cover as well as the hole it shall fit in.
2
Apply Sikaflex on the o-ring before as-
sembly.
3
xx1300000560
Run the SMB/BU cables into the SMB re-
cess.
4
Continues on next page
260 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.4.2 Refitting the cable harness
Continued
To Next Page
Loading...
